Atlas Filtri SANIC Under-Counter Nano Filtration (NF) System

The Atlas Filtri SANIC NF system can be used with numerous source waters including Municipal, Borehole Holes, River, Rain Water, Etc.

The Atlas Filtri system's Sanic Antimicrobial Housings are manufactured using proven Microban Silver-Based Technology to protect against the growth and reproduction of microorganisms, such as bacteria. 

Essentially the Microban Silver-Based Technology helps to extend the life span of a filter cartridge inside of the housings, by slowing down how quickly bacteria may grow inside of the housing and on the filter cartridge itself. 

Keep in mind, that while the Microban technology will slow down the growth of bacteria inside the housing, it is not designed to eliminate and/or remove bacteria from source water by itself. In order to eliminate and/or bacteria from a water source, you would require something such as chlorine dosing, or Ultra Violet (UV), or Membrane technologies (UF, NF, or RO), or 0.1-micron Filters, or any combination of these different processes. If you are looking to eliminate and/or remove bacteria and microorganisms from water, then we would recommend contacting our sales team for advice. 

Benefits of Atlas Filtri Filtration Products Featuring Microban® Antibacterial Technology

• Protected against bacterial proliferation by up to 99.99%
• Proven to stay cleaner and fresher in-between cleaning
• Help to maintain water purity by minimizing the risk of bacterial cross-contamination. With selected products, water is subject to bacteriostatic triple pre-filtration to eliminate impurities, pollutants, bad odors, and flavors
• Less likely to stain or develop bad odors
• More durable and easier to keep clean
• Antibacterial properties remain active for the expected lifetime of the product - they will not wash off or wear away
• Tested to international standards to ensure excellent antimicrobial performance

The Atlas Filtri SANI NF system's housings and brackets are manufactured in Italy and come with a two-year warranty* on the components. 

The housings are rated for a maximum of 8 bar (115psi), compared to the industry standard housings which are normally only rated for around 6 bar / 90psi. 

The top "heads" of the Atlas Filtri SANI NF system are molded as a single complete unit (Manifold)  and not individual housings that are then connected with fittings with thread sealing tape as is typically the standard for triple big blue systems. This leads to a far more robust unit, with fewer potential points of failure/leaks as can occur between individual housings that have been joined with individual fittings with thread sealing tape. 

The Atlas Filtri SANIC NF Includes the following:

• Atlas Filtri SANIC NF system (with Booster Pump)
• 100 GPD (Gallons Per Day) Nano Membrane
• Bacteria Pre-Filters Set (Sediment Filter (1 Micron), Premium KDF, & 0.2 Micron Pleated Filtration Cartridge)
• Pressure Protection Valve 

Benefits:

• Maintenance is easy and low-cost
• Filtered water tastes and smells great
• Promotes a healthy lifestyle
• Hidden away out of sight, only a chrome tap is visible.
• Removes calcium (lime or kalk) from water
• Flushing of the membrane is done automatically
• Preserve the natural minerals in the water
• Delivers up to 700 liters of filtered water per day

Atlas Filtri SANIC Reverse Osmosis System Stages: 

• Stage 1: 10 Inch Sediment Filter (1 Micron) - Removes Particles, Dirt, Sand, Mud, Rust, and other large visible particles in the water. At 1 Micron You also start to capture some bacteria from the water.
• Stage 2: 10 Inch Premium KDF Cartridge - Absorbs Chlorine, Heavy Metals and Organic molecules (bad odors) from the water. The KDF also inhibits the growth of bacteria on the cartridges, extending their life spans.
• Stage 3: 10 Inch 0.2 Micron Pleated Filtration Cartridge - 10" 0.2 Micron Water Filter replaced the Ultra Filtration Membrane as it dramatically reduces flush times making the system quicker to install and easier to maintain. This filter takes the bacteria load off of the RO membrane, helping to extend its life span.
• Stage 4: Nano Filtration Membrane - Removes bacteria, viruses, pesticides, and herbicides. The Nano Membrane also reduces the mineral content by only half, preserving at a lot of minerals in the water. The Nano will also remove Kalk / Hardness from the water. 
• Stage 5: T33 taste and odor filter - Absorbs any organic molecules that come off of the Nanomembrane.    

Keep in mind:

• The system has a water wastage rate of 1:1 due to constant flushing of the membrane, so for every 1 liter of clean, filtered water produced, 1 liter will be used to flush the system.

• An important thing to remember before installing any filtration system is to check, which pipe under the counter is bringing the water to the tap and what size the source piping is. The standard household piping size is normally ½ inch (12.7mm) or ¾ inch (19 mm) thick. Some older houses have copper piping instead of newer systems and in such cases, special attachments will be required to install the Nano to the copper piping. In order to ensure that you do not have to buy additional adaptors due to the connections not matching the piping, please check what type and size your piping is before ordering a filtration system.

• A hole will have to be drilled into the counter or table where the NF’s tap will be placed.

• The filters all have a certain life span and must be replaced to ensure that the system works effectively. Typically the prefilters will have a life span of 3 to 12 months depending on the quality of the source water. 
• The Nano system requires a water pressure of between 3 and 6 bars (50 to 100 psi) to operate. If your water pressure is lower than 3 bar (- 50 psi), we recommend that you consider the Nanosystem with the booster pump 
• These units are designed for up to 400ppm water and will dramatically lose efficiency as the mineral content climbs.

Filter System Installations:

Filtershop now offers you the option to have your Filter Systems Installed by us. We do install in and around Centurion, Pretoria, and Johannesburg.

If you are interested in having one of our technicians come to your home, business, or site to have a filter system installed, please contact us via email: [email protected] and we will get back to you with more information.

Note: Additional charges for any type of countertop other than wood, may be charged, as special drilling will be required which makes use of a very unique drill bit.

Dimensions of the Atlas Filtri Under the Counter Nano Filtration

Please keep in mind that these dimensions are with the standard RO tank the system comes with, if you select a different-size tank, then the dimensions will change

Warranty*

All Atlas Filtri Brand Housings, systems, components, fittings, and parts come with a 2-year* warranty. Please note that the warranty does not cover damage caused by mishandling, improper installation, or in situations where the maximum operating parameters for the product are exceeded. The Warranty does not cover consumables such as Filter cartridges and RO/Nano membranes, etc. 

*Please note that the warranty does not cover damage caused by mishandling, improper installation, or in situations where the maximum operating parameters for the product are exceeded. 

Filter System Installations:

Filtershop now offers you the option to have your Filter Systems Installed by us. We do install in and around Centurion, Pretoria, and Johannesburg.

If you are interested in having one of our technicians come to your home, business, or site to have a filter system installed, please contact us via email: [email protected] and we will get back to you with more information.

Note: Additional charges for any type of countertop other than wood, may be charged, as special drilling will be required which makes use of a very unique drill bit.

How To DIY Install:

DIY Filter Change:

Additional Options:

Tank Size 

The Reverse Osmosis systems use a "Pressure" tank to create a storage of pre-filtered water from which to draw from when opening the tap to fill a glass, cooking pot, etc.

Reverse Osmosis by its very nature is a slow process, so if you had to try to fill a container directly from the membrane, it would take a great deal of time to fill it. This is why the RO systems come with storage tanks, so there is already an amount of pre-filtered water that you can take from instead. 

The actual amount of water held by the tank varies depending on the incoming pressure, however, the typical rule of thumb is that 60% of the volume of the tank would be taken up by water, and the remainder by the bladder and air. For example, a 100 Litre RO tank would hold 60 Litres of actual water.

The Standard RO System comes with an 18 Litre (RO-132) RO Buffer Tank, which in practice will hold between 6 to 12 liters of actual water. 

There are both smaller tanks available for situations where space for installation is limited, as well as much larger tanks for where you want to have a greater amount of pre-filtered water available. 

Please note that when selecting a different tank size,  the standard tank (RO-132) will be removed from the system. 

Please see the tank Dimensions for the larger tanks below, please note that Filtershop cannot be held responsible if the tank is too large for the cupboard or area you want to install the RO system into.