Plumbed in Water Dispenser with Built-in Water Filters - Type A

The Plumbed in Water dispenser is designed to be plumbed directly into the mains. The dispenser will then automatically refill itself from the mains feed, removing the need for manually changing water bottles. 

The Plumbed in Dispenser has a filtration system that will filter the water prior to it filling the dispenser. 

The Filter System has the following stages: 

• Stage 1: 5 Micron Sediment Filter - Removes Dirt, Sediment, Dust, Rust, and other large visible Particles in the water.
• Stage 2:  Activated Carbon Filter - Absorbs chlorine and organic molecules (Bad Odours) from the water. 
• Stage 3:  5 Micron Sediment Filter - Further reduces particles and catches any activated carbon dust, that may come out of the Carbon Filter. 
• Stage 4:  0.2 Micron Pleated Filter - Filters out tiny particles, as well as bacteria from the water. 

The Filter Set needs to be replaced every 3 to 6 months, dependent on the quality of the source water. Keep in mind that if the source water quality is very poor then the lifespans of the filters can be even less. 

The Replacement Filter set is R 750.00 (Incl. vat/excl. Shipping & installation charges). 

Keep in mind that these filter stages are not changing the mineral content of the water in any way, so if your source water has a brackish (salty)  taste it will still be present when the water comes out of the dispenser.

The filters will not remove lime (Kalk / hardness) from the water, which can damage the components inside of the Dispenser. Please note that the Dispenser's warranty does not cover damage due to limescale build-up. If you do know that your water has a high level of lime then we would recommend adding additional filtration to protect the dispenser. 

Keep in mind:

•    The water coolers and its cooling system is similar to that of a fridge. Thus, it should be kept upright at all times. We try to make this as obvious as possible to the couriers, but sometimes they simply ignore this. Thus, when you receive the dispensers, please try and keep them upright and standing still for at least 48 – 72 hours before switching them on or putting water through the system. 
•    Similarly important, since the cooling circuit is designed to cool water effectively, it is incredibly important to make sure that there is water present in your dispenser first, before turning it on for the first time. If this is not done, the dispensers cooling circuit will “short out” to protect itself and will have to be “reset” manually, which is unnecessarily manual labour intensive.

• Limited Shipping: With Water Coolers, we deliver in Pretoria and Johannesburg.
• We can send them via courier but at the client's risk as we find couriers do sometimes damage them in transport as it is similar to a fridge.
• We do test the Water Coolers and a test report is included with the units.