Search
Products
    Menu Close

    Mixed Bed Resin (Di-Resin) - IND MB 115HP (25L Bag)

  • INDION MB 115HP specially designs a mixed bed ion exchange resin for use in the production of high purity water in the electronic and pharmaceutical industry. INDION MB 115HP is a highly regenerated mix bed resin to meet the desired purity required for such applications.
  • Availability: Out of stock
    R5 625,00
    i h

    Mixed Bed Resin (Di-Resin) - IND MB 115HP

     

    INDION MB 115HP specially designs a mixed bed ion exchange resin for use in the production of high purity water in the electronic and pharmaceutical industry. INDION MB 115HP is a highly regenerated mix bed resin to meet the desired purity required for such applications.

     

     

    Specifications

     

    Typically for most domestic and commercial situations, the Mixed Bed Resin is shipped in 25L Bags. 

    The Bag Dimensions are 35cm x 54cm x 12cm and 19kg**. 

    *Please note that the shipping weight listed below is for a Pallet of Resin, which is only for bulk orders. 

    **Please note that the bag dimensions may differ from Batch to Batch. 

     

    Storage

     

    Ion exchange resins require proper care at all times. The resins must never be allowed to become dry. Resins should, therefore, be always kept in shade. Since Indion MB 115HP is supplied in highly regenerated condition, any exposure to atmospheric air must be avoided as this will convert it to the carbonate form. The resin packing should not be opened during storage. 

     

     

     

    Safety

     

    Acid and alkali solutions are corrosive and should be handled in a manner that will prevent eye and skin contact. If any oxidizing agents are used necessary safety precautions should be observed to avoid accidents and damage to the resin.

     

    *
    *
    *
    Customers who bought this item also bought
    Picture of 8" x  44" FRP Vessel (2.5" thread)

    8" x 44" FRP Vessel (2.5" thread)

  • Height: 44" / 111.76cm
  • Width: 8" / 20.32cm
  • Volume: 30L
  • Port Thread Diameter: 2.5" / 6.35cm
  • R2 200,00
    Picture of Riser Pipe for 2.5" FRP Vessels (27mm)

    Riser Pipe for 2.5" FRP Vessels (27mm)

    R200,00
    Picture of 2.5" In and Outlet Head for FRP Vessels

    2.5" In and Outlet Head for FRP Vessels

  • Inlet/Outlet: 1" / 25mm Female
  • Maximum Pressure: 6 bar / 90psi
  • Base Thread (Port): 2.5" / 6.35cm
  • R450,00