Menu Close

    0.75kW VSD Booster Pump

    Pump specifications
  • Pump Model: YBP750
  • Motor Power: 0.75kW
  • Max Flow: 66lt/min
  • Max Pressure: 4.5 Bar
  • Max Fluid Temperature: 80˚C
  • Max Ambient Temperature: 40 ˚C
  • Package dimensions in mm: 361 (h) x 326 (w) x 331 (l)
  • Package weight: 15kg
    R6 995,00
    i h

    0.75kW VSD Booster Pump 


    0.75kW VSD Pump is the perfect choice if you require a constant pressure supply at minimal energy usage. It supplies between 2 and 4.5 bar pressure, with a flow range of 5 to 66 liters per minute. It also has a built-in, automatic start/stop function for when there is no flow.

    Add our Pump-to-Tank Connector Kit to this pump and seamlessly connect it to a variety of JoJo water storage tanks.


    Product Benefits:

    • Low noise level
    • Uses up to 80% less energy
    • Constant pressure supply
    • Easy to operate
    • Automatic start/stop function
    • Dry-running protection
    • Overcurrent protection
    • Motor power of 0.75kW
    • 2 to 4.5 bar pressure
    • 5 to 66 l/min flow
    • Pre-wired with 3-point plug


    Additional Options 

    Pump Cover 

    Specifically designed to accommodate our range of different Booster Pumps and VSD pumps, this cover is manufactured from high-grade virgin LLDPE (BPA-free) material, ensuring that your pump is protected against all weather conditions. There are several colors available. 

    Please note that the Pump Cover is only large enough to house the booster pump and its regulator only, if you have a pressure tank, it will need to be installed outside of the pump cover. 



    Add Surge Protection Plug 


    It is always strongly recommended to install a surge protection plug or adapter with any electrical appliance, including pressure pumps. This will safeguard the electrics against potential damage from power surges. 

    Adding a Pressure Tank 


    Adding a Pressure tank to your booster pump setup can help to reduce how often the pressure pump turns on and off, thus helping to reduce the total power consumption of the booster pump. The Pressure tank will be filled with a "buffer" of water (the number of liters depending on the size of the tank), so when a small amount of water is required in the household, such as flushing a toilet or using a tap to quickly wash your hands, this water will come out of the pressure tank first, meaning the pump will not need to switch on at first. As more and more water leaves the pressure tank, the pressure inside the tank will drop, until the pressure drops below a preset minimum pressure on the pressure sensor, at which point the pump will turn on continuing to feed the household with water and refilling the pressure tank. Once there is no more water required in the household, the pressure tank is filled, and until the maximum pressure setting on the pressure sensor is reached, the pump will then turn off again. 

    Keep In Mind: Pressure tank litre sizing is the whole volume inside of the pressure tank, part of which will be taken up by Air and the rest of the volume will then be for the water you fill it with. As a result, water will only take up between 30 to 60% of the total volume of the tank depending on pressure. For example, a tank that is rated for 100 Litres will only actually hold between 30 & 60 litres of water in real-world practice. Please keep this in mind when selecting your tank size. 

    Customers who bought this item also bought
    Picture of 1.5kW VSD Booster Pump

    1.5kW VSD Booster Pump

    Pump specifications
  • Pump Model: YBP1500
  • Motor Power: 1.5kW
  • Max Flow: 108 lt/min
  • Max Pressure: 6 Bar
  • Max Fluid Temperature: 80˚C
  • Max Ambient Temperature: 40 ˚C
  • Package weight: 22kg
  • R11 995,00