Fittings and Parts for Domestic Filter Systems
Add to wishlist
1/4" (6mm) Nipple for attaching two 1/4" housings together
Add to wishlist
Mounting Clips typically used for attaching inline filter to surfaces such as wall or brackets
Add to wishlist
1/4"and 3/8" inline Non Return Valve
Add to wishlist
Storage tanks for Reverse Osmosis and Nano Filtration systems
Add to wishlist
Add to wishlist
Typically part of an under-the-counter RO or Nano system with a booster pump.
Acts a shut-off valve for the drain when the high-pressure switch on the system is tripped.
Add to wishlist
Electronic meters used to measure the Total Dissolved Solids (TDS) in a water source.
Please note that the look and design of the TDS Meters can change from batch to batch
Add to wishlist
Leak Detector specifically designed for under the counter filter systems that use the 1/4 Inch (6mm) piping. Helps to stop leaks before they can cause damage
Add to wishlist
Pipe to thread elbows. For connecting pipe to standard housings and membrane housings
Add to wishlist
Straight connections for joining pipe to thread.
Add to wishlist
Supply connector and ball valve for under the counter RO and Nanofiltration systems
Add to wishlist
Part of the standard Under the counter RO & Nano filtration systems
Add to wishlist
Add to wishlist
High and low Pressure switches for under the counter RO's and Nano's with booster pumps.
Add to wishlist
Fittings for joining to pieces of either 1/4" or 3/8" pipe together. Available in both elbow and straight types
Add to wishlist
Tap for the under the counter RO and Nanofiltration systems.
Add to wishlist
Add to wishlist
Inline Manual Valves for 1/4" and/or 3/8" Piping
Add to wishlist
Inline Manual Valves for 1/4" and/or 3/8" Piping to Thread
Add to wishlist
For Linking 1/4" pipng to 3/8" Piping
Add to wishlist
Pressure Reducing valve, recommended if you want to install an under the counter system and you suspect your water pressure may reach 6 bars or more.
Add to wishlist
Add to wishlist
Non-return Valves for membrane housings. Allows water to flow in out in one direction, and stops the water from flowing back in from the other direction.
Add to wishlist
Mounting Elbow allows the 1/4" piping to be attached to and feed into containers such as tanks or buckets
Add to wishlist
The Permeate Pump greatly increases the efficiency of a standard 100 GPD RO System. Take a 100GPD RO System from 38% to 64% efficiency.
Add to wishlist
Add to wishlist
Calibrated to the appropriate flow for use with common home RO membrane system flow rates
Maintains pressure across the membrane element which is an integral part of the reverse osmosis process
Easily installed
Available in several styles to suit your system’s configuration
Add to wishlist
Add to wishlist
Add to wishlist
Filter Housing Color: White
Filter Housing Size: 10 Inch Standard / Slim
Double O-ring Seal
Inlet/Outlet Port Sizes: Female 1/4" Thread
Maximum Pressure: 6 bar / 90psi
Maximum Operating Temprature: 4 - 38°C
Add to wishlist
Add to wishlist
Add to wishlist
Add to wishlist
Add to wishlist
Quick Fit Size: 1/4" / 6mm
Female Thread Size: 3/4" / 20mm
Add to wishlist
Add to wishlist
Add to wishlist
Add to wishlist
Add to wishlist
Add to wishlist
Add to wishlist
Add to wishlist
Compatible with Slimline / Standard Housing
Add to wishlist
Add to wishlist
Add to wishlist
220v / 10A
Inlet & Outlet: 1/4" Quick Fit
Add to wishlist
220v / 10A
Pipe Connection: 1/4" Quick Fit
Add to wishlist
24V DC
Working Pressure: 72 psi
Pressure Setting: 125psi
Working Flow: 1.1 LPM
Inlet Pressure: 15 - 40psi
Max Water Temperature: 25 °C
Inlet & Outlet port: 1/4" Female Thread
Add to wishlist
12V DC
Max Output Pressure: 123 - 137psi
Flow at 72psi: > 1030ml/min
Current at 72psi: <1.2 A
Working Flow: 1 LPM
Rated Current: < 1.4 A
Inlet Pressure: 29psi
Max Water Temperature: 25 °C
Inlet & Outlet port: 1/4" Female Thread
Does not come with a 12v Transformer
Add to wishlist
36V DC
Max Output Pressure: 123 - 137psi
Flow at 72psi: > 1030ml/min
Current at 72psi: <1.2 A
Working Flow: 1 LPM
Rated Current: < 1.4 A
Inlet Pressure: 29psi
Max Water Temperature: 25 °C
Inlet & Outlet port: 1/4" Female Thread
Add to wishlist
Input: 220V - 240V 50/60Hz
Output: 24V DC / 1.2A
Add to wishlist
Quick Fit Size: 1/4" / 6mm
Male Thread Size: 1/2" / 15mm
Female Thread Size: 1/2" / 15mm
Add to wishlist
Add to wishlist
Add to wishlist
Inlet & Outlet: 1/4" / 6mm Female Thread
Add to wishlist
Inlet & Outlet: 1/2" / 15mm Female Thread
Add to wishlist
PSI: 0 - 150
PSI: 0 - 10 BAR or Kg/cm2
Display Size: 30mm