Search
Products
    Menu Close

    OneStop Plus™ Anti-Scale Point of Use (POU) Systems

    0Types Available
    OneStop Plus™ Anti-Scale Point of Use (POU) Systems

    The OneStop Plus™ system is designed to protect open circuit pipes from scaling. Additionally, it reduces the amounts of heavy metals such as copper, lead, mercury, zinc, and cadmium.

    The OneStop Plus™ Anti-Scale Point of Use (POU) Systems are meant for single point setups, not for whole household or building applications. It can be installed as a Point Of Entry device, for both cold and hot water, or directly before the apparatus that needs to receive treated water (sauna, dishwashers, washing machine etc.).

    If you are looking for OneStop Plus™ Anti-Scale system for a whole house application, then we would recommend looking at the OneStop One Cartridge system, at the following link. 

    OneStop Plus™ avoids scale by interacting with the scale molecules, turning them into a harmless crystal (TAC system). These crystals are now suspended in the water but do not attach to surfaces and are simply washed away. In this way, the scaling on the surfaces and in the pipes is dramatically reduced. OneStop™ is NOT a softener, it is a water conditioner. The water treated by OneStop Plus™ keeps the original healthful minerals while solving the scaling problems.

     

    Benefits: 

    • Prevents scaling without using Chemicals 
    • Cost effective and Eco-friendly
    • Also reduces heavy metals such as copper, lead, mercury, zinc, and cadmium 
    • No Regeneration or backwash required
    • Increases the efficiency of boilers and all other equipment in contact with the treated water 
    • Easy to be installed, no electricity, and no backwash pipe needed
    • Compatible with all the other water treatment devices already installed
    • Solves the typical problems of standard softeners. 

     

    Applications: 

    • Protecting Geysers
    • Washing Machines
    • Dishwashers
    • Cooling and Evaporation Systems
    • Car Washes

      

    Important to Keep in mind 

    The OneStop Anti-Scale Systems have very specific operating parameters with regards to source water quality and Temperatures. Before purchasing a OneStop Plus Filter System we would strongly recommend having the source water tested first, to ensure that the system will function in your situation. Please note that Filtershop cannot be held responsible if the source water has not been tested beforehand, and the OneStop Plus System is not effective. 

    Water Chemistry Limitations:

    • pH: 6.5 to 8.5
    • Maximum Hardness: <1300ppm
    • Temperature: 5°C to 60°C
    • Maximum Chlorine: <3.0 ppm
    • Maximum Iron: <0.3 ppm
    • Maximum Manganese: <0.05 ppm
    • Hydrogen Sulfide should not be present
    • Phosphates should not be present
    • Oil and grease should not be present 

     

    How OneStop Plus Media Works

     

    OneStop Plus Systems in comparison to other Anti-Scale Prevention Methods

     

    OneStop Media Effectiveness on Heavy Metals.

    As well as helping to control Scale in a source water, the OneStop Filtration Media will also remove heavy metals from the water, including Lead, Mercury, Cadmium, Copper, and Zinc. 

    Keep in mind that the effectiveness of the OneStop Media to remove heavy metals from the water will depend on the actual water quality as well as the flow rate (Litres per minute/per hour) through the system. 

    Typically the OneStop Media has an effective removal rate of 30 to 60% depending on the specific metal and flow rate. Please see below an exsert from a water test done showing the effectiveness of the OneStop Media against heavy metals. 

    Whats included in the OneStop Plus Anti-Scale Filter Kits: 

    • Filter Housing (either 10", 10" Jumbo, or 20" Jumbo) 
    • OneStop Filter Cartridge (either 10", 10" Jumbo, or 20" Jumbo) 
    • Wall Mounting Bracket 
    • Housing Spanner 

     

    Maintenance (Replacement Periods) 

    The OneStop Plus Media Cartridges have a 6 to 12-month* lifespan before they need to be replaced.

    *The Replacement Period will depend on both the flow rate through the systems, as well as the quality of the source water.

    Typically the first sign that the Cartridge needs to be replaced would when you start to see hardness developing on your pipes or geysers. 

    Please ensure when ordering a replacement cartridge for your OneStop Plus Anti-Scale System that you order the correct size cartridge for your system. Filtershop cannot be held responsible if the incorrect Filter Cartridge is ordered for your system. 

    Housing Dimensions 

     

    • 10" Filter Housing - 30cm (H) x 12cm (W) / Port (P): 3/4" / 20mm
    • 10" Jumbo Housing - 32.5cm (H) x 18.5cm (W) / Port (P): 1" / 25mm
    • 20" Jumbo Housing - 61cm (H) x 18.5cm (W) / Port (P): 1" / 25mm

     

    Flow Ratings for the Different OneStop Variations

    Keep In Mind 

     

    • Do not use OneStop PlusTM in closed loop systems
    • Do not use OneStop PlusTM before a storage tank. After 72 hours the water will re-dissolve the crystals back into solution and it will be able to form scale again.
    • Do not use OneStop PlusTM in steam boilers
    • Do not undersize or oversize the OneStop PlusTM system. It needs to be sized according to flow rate to achieve bed lift and maximize efficiency.
    • Incoming water should be tested to meet the influent water chemistry requirements
    • Water containing heavy loads of dirt should be prefiltered prior to the system.
    • Do not install after copper/zinc redox alloy medias
    • It does not prevent water spotting or mineral residue build upon areas that are repetitively wet and dry. That is a product of evaporation.
    • Adding chemicals to water that has been treated by OneStop PlusTM may counter its treatment effects.
    • Systems installed on or above a second story should also have a vacuum breaker. 

    Filter System Installations:

    Filtershop now offers you the option to have your Filter Systems Installed by us. We do installation in and around Centurion, Pretoria and Johannesburg.

    If you are interested in having one of our technicians come to your home, business or site to have a filter system installed, please contact us via email: [email protected] and we will get back to you with more information.

    Note: Additional charges for any type of counter-top other than wood, may be charged, as special drilling will be required which makes use of a very unique drill bit.

    PVC Threaded and Glue Fittings

    PVC(Polyvinyl chloride) fittings are used to connect sections of pipes or tubes, adapt to different sizes or shapes, and controlling the flow of water. There are two predominant types of PVC fittings namely PVC Glue Fittings and PVC Threaded Fittings. The difference between the two is that PVC Glue Fittings result in permanent joints and PVC Threaded Fittings are semi-permanent and can be replaced. PVC Glue fittings are joined with primer and cement- a chemical solvent that melts the surface of the PVC and then quickly re-hardens to fuse the pieces together. This results in an airtight, leak-proof bond similar to what you get with welding metal. An example of such a fitting is a PVC Glue Reducing Socket which is used to join together two pieces of PVC pipes with different diameters. Another example would be a  90 Degree Elbow which is used to connect two pipes of the same diameter at an angle of 90 degrees.PVC Threaded fittings utilise a simple threaded connection whereby replaceable 'male threaded' are screwed into 'female threaded'.Male threads have a thread on the outside of the fitting and female threads have a thread on the inside. When you thread the fitting in, it compresses against the other threads.PTFE tape is used to thread these together and the proper way to assemble threaded fittings is to finger tighten, then add one to two turns but no more. An example of a threaded fitting is a Reducing Nipple Male Threaded which is used to connect between two female threads of different diameters. 

    Link To PVC Fittings

    *
    *
    *
    Picture of 10" OneStop Plus™ Housing Kit System (OSP-10SB)
    10" OneStop Plus™ Housing Kit System (OSP-10SB)
  • Maximum Flow Rate: 3 Litres Per Minute (LPM)
  • Filter Housing Size: 10 Inch
  • Inlet/Outlet Port Sizes: Female 3/4" / 20mm Thread
  • Maximum Pressure: 6 bar / 90psi
  • Maximum Operating Temprature: 4 - 38°C
  • Model Code: OSP-10SB
    R2 795,00
    i h
    Picture of 10" Jumbo OneStop Plus™ Housing Kit System (OSP-10JB)
    10" Jumbo OneStop Plus™ Housing Kit System (OSP-10JB)
  • Maximum Flow Rate: 8 Litres Per Minute (LPM)
  • Filter Housing Size: 10 Inch Jumbo / Fat / Big
  • Inlet/Outlet Port Sizes: Female 1" / 25mm Thread
  • Maximum Pressure: 6 bar / 90psi
  • Maximum Operating Temprature: 4 - 38°C
  • Model Code: OSP-10JB
    R6 995,00
    i h
    Picture of 20" Jumbo OneStop Plus™ Housing Kit System (OSP-20JB)
    20" Jumbo OneStop Plus™ Housing Kit System (OSP-20JB)
  • Maximum Flow Rate: 15 Litres Per Minute (LPM)
  • Filter Housing Size: 20 Inch Jumbo / Fat / Big
  • Inlet/Outlet Port Sizes: Female 1" / 25mm Thread
  • Maximum Pressure: 6 bar / 90psi
  • Maximum Operating Temprature: 4 - 38°C
  • Model Code: OSP-20JB
    R7 995,00
    i h